Thermal Elastomers

Thermal gels and encapsulants offer the most flexibility in formulating to a flowable or non-flow product that fully cures to soft gel or firm elastomer for long term stability in thermal cycling. The cure rate can also be adjusted for rapid room temp cure or with long working time followed by heat curing. They can be used as a TIM between component and heat sink, or assemblies can be encapsulated for optimum thermal management. Most are offered in a two-component 1:1 mix ratio package for automated meter-mix and dispensing.

PRODUCTS THERMAL COND W/MK SHORE A FLAMMABILITY
ThermoSink 25 >2.5 40 – 60 VO
ThermoSink 15-3 >1.3 50 – 65 VO
ThermoSink 35-1 >3.4 45 – 55 VO

Inquire About Our Products

Your Name (required)

Your Email (required)

Subject

Your Message

captcha